FHJDC 10KV Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Waya

The sama insulated waya walƙiya hujja grounding waya clip yana da tsarin talakawa grounding waya clip, da kuma ƙara da m rata sallama na'urar, The huda lantarki a kan babba karshen iya shiga cikin rufi Layer na waya sa walƙiya kariya grounding zobe samar da wani lantarki. haɗi tare da waya, Rataya sandar ƙasa a cikin kula da layi azaman haɗin layin ƙasa;Ana shirya na'urar lantarki mai ɗaukar baka a kusurwar waje na ƙananan ƙarshen zoben ƙasa.An kafa gibin fitarwa daidai da flange na ƙafar karfe na layin ginshiƙin insulator PS15 ko P20, (Idan ya dace da insulators ko wasu insulators, yakamata a shigar da na'urori na ƙasa na musamman).A lokacin aiki na yau da kullun, akwai babban tazarar iska tsakanin na'urar arc mai ɗaukar nauyi da flange na ƙafar ƙarfe na insulator ko kuma na'urar da ke ƙasa, kuma babu mai gudana a halin yanzu.Ana haifar da walƙiya tsakanin wutar lantarki na baka da na'urar lantarki ta ƙasa (ko flange na ƙafar ƙarfe na insulator), ƙirƙirar tashar gajeriyar kewayawa, kuma ci gaba da mitar wutar lantarki zai kasance tsakanin na'urar arc na kariyar walƙiya ta matse ƙasa da na'urar lantarki ta ƙasa ko flange na ƙafar ƙarfe na insulator.Yana ƙonewa kuma yana fitar da ƙarfin ƙarfin wuta don kare waya daga ƙonewa da kuma cire haɗin.
Na ci gaba da kamfanin don ɗaukar tsarin haƙoran haƙora na musamman da ƙirar lantarki, shigarwa mai sauƙi, ba tare da cire rufin ba, halayen ingantaccen aiki, aikin arcing na ƙarni na biyu mafi kyau, yana da ƙimar haɓaka mai girma.

1. Ya kamata a shigar da igiyar igiyar igiyar walƙiya na ginshiƙan kariyar walƙiya a kan giciye hannu daidai da madugu, kuma yakamata a kiyaye ƙwayar ƙafar ƙarfe, wanda yayi daidai da tsarin shigarwa na gargajiya na insulator, kuma sandar baka mai jagora ya zama dole. kai tsaye zuwa gefen nesa na hannun giciye (mafi nisa daga giciye hannun);Ya kamata a daidaita sandar farawa ta baka a hanya ɗaya, zai fi dacewa zuwa gefen kaya;
2. Akwai hanyoyi guda biyu na hushi da murɗawa: (1) Hanyar daɗaɗɗen ƙwayar ƙwaya: saka wayar da aka keɓe a cikin ramin daidai gwargwado, da farko sai a ƙara ƙarar goro da hannu, sannan a yi amfani da maƙarƙashiyar soket a madadin. a matse ko'ina har sai da karfin juyi saman goro ya fito.(2) Dangane da sashin giciye na waya da yanayin yanayin, saita ƙimar maƙallan wuta zuwa 20-35Nm, kuma yi amfani da maƙarƙashiya don ƙara matsa lamba biyu a madadin kuma a daidaita.Tushen ya isa, sannan a danne goro don hana matsi na goro daga sassautawa;
3. Hanyar da ba ta huda waya ba ita ce: cire wani sashe na waya da aka keɓe na kusan 65-80mm, kunsa shi da tef ɗin aluminium sannan a saka shi a kan kayan aikin yankan waya.Matse goro da matsi don fitar da shingen matsawa don damfara waya, ta yadda za a hada kumfa mai rufewa zuwa wajen injin matsi na karfe.(Don cikakkun bayanai, da fatan za a duba jagorar shigarwar samfur)