NXJL 35-240mm² 10.8-36.4KN Babban Mai Gudanarwa Mai Janye Sanda Aluminum Alloy Tension Matsala

NXJL 35-240mm² 10.8-36.4KN Mai Gudanar da Sama Mai Kula da Sama

Takaitaccen Bayani:

NexJl weded-nau'in infulated m murhun clump ya dace da tashar aluminum (jkly) ko kuma insultort sub na sashen, don gyara da ƙara ɗaure da waya da ba za a iya ɗaure shi ba.

Aika mana imel

Cikakken Bayani

Tags samfurin

Bayanin Samfura

NexJl weded-nau'in infulated m murhun clump ya dace da tashar aluminum (jkly) ko kuma insultort sub na sashen, don gyara da ƙara ɗaure da waya da ba za a iya ɗaure shi ba.An raba samfuran zuwa nau'i biyu, kowane nau'in sabon samfur yana sanye da nau'ikan nau'ikan nau'ikan filastik daban-daban don masana'antar farar hula bisa ga ƙayyadaddun waya.

Siffar Samfura

Siffofin fasaha da girman tsarin

Fasalolin samfur da abubuwan shigarwa

Abubuwan shigarwa:
1. Kafin shigarwa, da fatan za a duba ko alamar da ke gefen gefen ƙwanƙwasa ya dace da waya da za a shigar;
2. Bayan tabbatar da cewa daidai ne, haɗa farantin rataye tare da na'ura mai haɗawa, haɗa kayan haɗi tare da insulator, kuma buɗewar jiki ya kamata ya zama ƙasa kamar yadda zai yiwu;
3. Yi amfani da na'urar tayar da waya don ɗaukar wayar zuwa wuri mai dacewa, sanya wayar da aka keɓe a cikin rami na ciki na jiki, sa'an nan kuma sanya shi a cikin core mai siffa mai insulating, yayin da nau'i-nau'i guda biyu masu siffar ƙugiya suna kiyaye su da kyau. ;
4. Matsa ƙarshen tsakiyar siffa mai siffa don riga-kafi.Lokacin da ake dannawa, kar a taɓa gefen ginshiƙi mai siffar wedge da Layer na insulation na waya, sa'an nan kuma za a riƙa murƙushe su biyun da juna bayan dannawa, sannan a cire mai tayar da waya sannan a daidaita goro don biyan bukatun injiniya. ;
5. Don tabbatar da cewa ƙuƙwalwar tashin hankali ba ta janye waya ba bayan ƙarfafa waya, ana bada shawara a ajiye akalla mita 1 na tsawon waya a gefen jumper na ƙarshen wutsiya na tsakiya mai siffar wedge.
1. An jefa harsashi tare da anti-oxidation high-ƙarfin aluminum gami.

Siffofin:

2. Ƙaƙwalwar ƙwanƙwasa an yi shi ne da filastik da aka ƙarfafa, ingantaccen ƙarfin juriya na mita shine ≥18kV, kuma ana kiyaye wutar lantarki na minti 1 ba tare da lalacewa ba.
3. Babu buƙatar cire kayan da aka rufe, kuma yana da na kowa ga waya mai mahimmanci na aluminum.
4. Babu hasarar wutar lantarki, samfurin ƙwararren mai ceton makamashi.
5. Tsarin nau'in wedge, sauƙi mai sauƙi da abin dogara.