TBP-200 35KV mekhahlelo e meraro e kopantseng overvoltage mosireletsi lehalima

Tlhaloso e Khutšoanyane:

Mohato o meraro o kopantsoeng le mosireletsi oa overvoltage (mohato o meraro o kopantsoeng oa ho ts'oaroa) o sebelisetsoa ho sireletsa lisebelisoa tsa motlakase ho tsoa kotsi ea ts'ireletso ea lisebelisoa tsa motlakase, ke mofuta o mocha oa ho ts'oaroa, litšoaneleho tsa eona moeling o pakeng tsa karolo ea overvoltage. nako e ts'oanang, 'me mohato oa overvoltage o fokotsehile ka katleho, sena ke setšoantšisi se tloaelehileng se ke keng sa se etsa.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Mokhahlelo o tharo o kopantsoeng le mosireletsi oa overvoltage (mehato e meraro e kopantsoeng le surge arrester) ke sesebelisoa se sireletsang se sebelisetsoang ho sireletsa thepa ea motlakase ho tloha likotsing tsa overvoltage.Ke mofuta o mocha oa surge arrester., 'me ka katleho ho fokotsa phallo-to-phase overvoltage , e leng ntho e ke keng ea khoneha ho batšoaruoa ba tloaelehileng.E sebelisoa haholo ho sireletsa li-switches tsa vacuum, mechine ea motlakase e potolohang, li-capacitor tsa matšeliso a tšoanang, limela tsa motlakase, li-substations, joalo-joalo. Mosireletsi enoa ea kopantsoeng o 'nile a sebetsa ka lilemo tse fetang leshome,' me mokhoa ona o ipakile e le mokhoa o ka khonehang le o sebetsang oa ho fokotsa mohato. -to-phase overvoltage.Mosireletsi ea kopaneng a ka bapala karolo ea bats'oari ba tšeletseng ba tloaelehileng.Kaha mosireletsi o sebelisa li-resistors tsa zinc oxide tse nang le matla a maholo e le likarolo tse ka sehloohong, o na le litšobotsi tse ntle tsa volt-ampere le bokhoni ba ho monya overvoltage, 'me a ka fana ka tšireletso e ka tšeptjoang bakeng sa thepa ea tšireletso, e tummeng haholo tsamaisong ea matla.

形象2

Tlhaloso ea Mohlala

型号说明
形象1

Sehlahisoa botekgeniki parameters le Installation boholo

参数1

外形安装及尺寸2 外形安装及尺寸1

形象.

Sebopeho sa Sehlahisoa likarolo le boholo ba tšebeliso

1. Novel le sebopeho se ikhethileng, khokahano ea linaleli tse 'ne, ts'ebetso e ntle ea tekheniki, ho kenella le ho hanyetsa matla a phahameng, e sebelisang haholo le ho fokotsa sebaka sa ts'ebeliso.
2. Seaparo se entsoeng ka motsoako se bōptjoa ka ho feletseng, se na le tiiso e ntle, e thibelang ho phatloha, ho sebetsa ha mongobo, ho thibela ho tsoa ha metsi, ho thibela ho senyeha ha motlakase, ho thibela litšila, le hydrophobicity e ntle.
3. High-voltage cable wiring ho etsa bonnete ba matla a ho kenya letsoho le ho kenngoa ha maemo.
4. Nyenyane e nyane, boima bo bobebe, sebaka sa ho boloka, haholo-holo se loketseng ho kenngoa ka likhabinete tse fapaneng tsa switjha (moralo oa sehlahisoa sa k'hamphani o ikhethile, o ka kenngoa ka ho otloloha kapa o otlolohile)
Khafetsa ea matla: 48Hz ~ 60Hz
-Mocheso oa tikoloho: -40°C~+40°C
- Lebelo le phahameng la moea: ha le fete 35m/s
- Altitude: ha e fete 2000m
- Matla a tšisinyeho ea lefatše: ha a fete likhato tse 8
- Botenya ba leqhoa: ha bo fete 10 metres.
- Matla a nako e telele a ho sebetsa ha a fete boholo ba motlakase o sebetsang ka nako e telele.

形象...

Litekanyetso tsa ts'ebetsong ea sehlahisoa le khetho ea tšebeliso

Sehlahisoa sena se sebelisa maemo a naha a GB11032-2000 "AC non-gap metal oxide arrester", JB/T10496-2005 "AC ea mekhahlelo e meraro e kopantsoeng le "non-gap metal oxide arrester", ZBK49005-90 "AC system with series gap metal oxide arrester" " ", JB/T8459-2006 "Mokhoa oa ho Kopanya Sehlahisoa sa Surge Arrester".
The tharo-mohato kopantswe overvoltage mosireletsi e arotsoe ka mofuta gapless le letoto la lihlooho tse gapped mofuta.Phapang e sebelisoang ke: bakeng sa mosireletsi oa motlakase o se nang lekhalo, ha feela ho na le overvoltage holim'a tsamaiso, e ka kenngoa hantle le ho hatelloa.Ka lekhalo mofuta overvoltage mosireletsi, lekhalo mofuta overvoltage mosireletsi tla nka khato feela ha matla a overvoltage tsamaisong fihla ho senya ka letoto la lekhalo mofuta ka mosireletsi gagamalo 'me e sebelisoa ho lahla.
Ka hona, ho kgothaletswa hore basebedisi ba khethe sesireletsi sa motlakase se se nang lekhalo tlas'a maemo a tloaelehileng, 'me tšireletso ea mofuta oa gap overvoltage e loketse libaka tseo motlakase oa tsamaiso ea tšitiso e leng khōlō haholo kapa switch e buloa hangata le ho koaloa.
Bakeng sa ho tsamaisa linako tse fapaneng tsa ts'ebeliso ea bareki, k'hamphani ea rona e tsetetse matsapa a mangata a nts'etsopele ho nts'etsapele mefuta e fapaneng ea ts'ireletso ea overvoltage le lisebelisoa tse tšehetsang tseo basebelisi ba ka li khethang.
Haeba thapo e hloka ho lelefatsoa, ​​ka kopo hlalosa ha o reka.Mofuta oa ka ntle ha o na lithapo tse nang le matla a phahameng.Ka kopo, hlakisa ha u reka.

形象3

Lintlha tsa sehlahisoa

细节3
细节4

Lihlahisoa tsa sebele

实拍

Sekhutlo sa workshop ea tlhahiso

车间
车间

Sephutheloana sa lihlahisoa

包装

Nyeoe ea kopo ea sehlahisoa

应用

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona