GW9 12KV Low price direct sale outdoor high voltage isolating switch

Short Description:

This item is single-phase disconnect switch used in three-phase line system. It is in simple structure, economical and convenient in use.


Product Detail

Product Tags

Product Description

This item is single-phase disconnect switch used in three-phase line system. It is in simple structure, economical and convenient in use.
This disconnect switch is mainly composed of base, post insulator, main conductive loop, and self-locking devices. It is single-phase fracture vertical opening structure, and the post insulators are installed on their bases respectively. The switch breaks and closes the circuit by a knife-switch structure, whose knife switch is composed of two pieces of conductive blades for each phase. There are compression springs on both sides of the blade, and the height of springs can be adjusted to obtain the contact pressure required by the opening knife. When the switch is opened and closed, an insulated hook rod is used to operate the mechanism part, and the knife has a self-locking device.

形象2

Model Description

型号说明
形象3

Technical parameters and Structural installation dimensions

参数

参数1 参数2

安装方式

结构及安装尺寸

形象4

Product Structural features and working principle

1. This isolating switch is a single-phase structure, and each phase is composed of a base, a ceramic insulating pillar, an inlet and outlet contact, a knife board and other parts.
2. There are compression springs on both sides of the knife plate to adjust the contact pressure, and the upper end is equipped with a fixed pull buckle and a self-locking device connected to it for opening and closing of the insulated hook.
3. This isolating switch is generally inverted, and it can also be installed vertically or inclined.
The disconnect switch opens and closes by using an insulated hook rod, and the insulated hook rod buckles the disconnect switch, pulling the hook to the opening direction. After unlocking the self-locking device, the conductive plate connected to it will rotate to realize the opening action. When closing, the insulating hook rod against the hook of the disconnect switch drives the shaft to rotate, so that the connected conductive plate rotates to the closing position and
the disconnect switch closes.
This type of disconnect switch can be installed on pillars, walls, ceilings, horizontal frames or metal frames, and can also be installed vertically or obliquely, but must assure that the contact knife is turned downward when it is opened.

形象1

Environment condition

(1) Altitude: not more than 1500m
(2) Maximum wind speed: no more than 35m/s
(3) Ambient temperature: -40~+40
(4) The thickness of ice coating is not more than: 10mm
(5) Earthquake intensity: 8
(6) Pollution level: Grade IV

形象.

Product details

细节

Products real shot

实拍

Product choice

产品选型

A corner of the production workshop

车间 (2)
车间

Product packaging

4311811407_2034458294

Product application case

案例1
案例2

  • Previous:
  • Next:

  • Write your message here and send it to us